Precision MIM Engineering & Data-Driven Cost

Stop waiting weeks for vague supplier quotes. We eliminate procurement friction by providing rapid, neutral technical audits and should-cost analysis, helping you make informed decisions in 48 hours.
• The Problem: Traditional quotes are often slow(Traditional quoting takes 2+ weeks.), biased, and lack a technical breakdown, leading to hidden tooling risks.
• Our Solution: We provide an objective, data-backed reference point. As an independent third party, we do not represent any factory, ensuring our cost benchmarks and DFM reviews are 100% honest and in your best interest.

Slash your machining costs by over 50% by choosing the MIM process.Don't just accept the first quote. We've audited 200+ parts and consistently deliver 30–50% further savings compared to initial MIM supplier bids.Optimize Your MIM Production Without Switching Suppliers

MIM Expertise: Industrial Applications & Process

• The Power of MIM: Metal Injection Molding (MIM) combines the design freedom of plastic injection molding with the structural integrity of high-performance metals.
• Industry Benchmarks: Our expertise covers mission-critical components for:
• Consumer Electronics: Hinges, internal structural frames, and connectors.
• Medical Devices: Surgical instruments, orthodontic brackets, and implants.
• Automotive: Turbocharger vanes, fuel system sensors, and locking mechanisms.
• Aerospace & Defense: High-strength miniature actuators and specialized fasteners.
• Is Your Part a Fit? We evaluate wall thickness (typically 0.5mm - 5mm), geometric complexity, and weight (0.1g - 250g) to determine if MIM is your most cost-effective solution.

We are an independent consultancy. We do not manufacture parts; we provide the expertise to ensure your current manufacturing is cost-effective and high-quality.

• Disclaimer: Reports provided by MIM-AuditPro are for technical and budgetary reference only. They do not constitute a legal contract for manufacturing or a guarantee of final supplier pricing.
• Copyright: © 2026 MIM-AuditPro. All Rights Reserved.

Core Technical Services

• Detailed Should-Cost Analysis (Mainly providing quotes from Taiwan and Mainland China): Granular breakdown of material yield, cycle times, sintering energy, and secondary op budgets.
• Comprehensive DFM Review: In-depth evaluation of gate locations, parting lines, and draft angles to prevent molding failures.
• Key Process Validation: Technical auditing of material density, heat treatment specs, and corrosion resistance requirements.What You Receive
• Content: Every audit concludes with a professional MIM-Audit Report, featuring quantitative cost benchmarks and a qualitative technical risk assessment.
• We are an independent consultancy. We do not manufacture parts; we provide the expertise to ensure your current manufacturing is cost-effective and high-quality.

Audit Quotation Sample - Click image to zoom in.

DFM - Click image to zoom in.

FAQ: Why Independent Auditing?

• Why pay for a quote? Free factory quotes are sales tools. Our paid audits are engineering tools. You gain a professional benchmark that suppliers cannot manipulate during negotiations.
• Why not just ask 3 suppliers? Suppliers often hide risks to win the bid. We expose the risks (like sintering distortion or secondary op costs) before you commit to tooling.• Who performs the technical audit and should-cost analysis?Every report is personally conducted and reviewed by our Senior MIM Engineering Expert, who brings over 15 years of hands-on experience in the Metal Injection Molding industry. Having optimized more than 500+ components for global clients, we ensure that you receive practical, shop-floor-ready insights rather than just automated data. We provide an independent, third-party perspective that is 100% neutral and in your best interest.
• Anonymous Statistics: 200+ MIM parts audited, helping clients save an average of 30–50% in procurement costs during the RFQ phase.

Case #01 (Medical Device): Optimized a 17-4PH surgical handle. Avoided $5,000 re-tooling cost by identifying wall thickness imbalances before mold fabrication.Case #02 (Consumer Electronics): Audited an initial supplier quote. Identified 40% over-pricing on sintering energy costs, saving the client $1.2M annually.

Data Security

🛡️ Your IP is Safe: We utilize encrypted transmission via Payoneer and Tally to ensure maximum security.🔒 IP Sovereignty: All uploads are automatically protected by our Master Professional NDA.🔍 The "Blind" Protocol: For maximum security, we encourage clients to remove title blocks/logos from drawings.⚖️ Pure Neutrality: We take zero commissions from suppliers. We provide the data; you maintain the control.🧹 Data Purge: All CAD files are automatically purged from our workstations within 72 hours of report delivery.✅ Expert Verified: Every report is protected by Verification Seal ID: MAP-ENG-2026.

[View Master NDA]

• Disclaimer: Reports provided by MIM-AuditPro are for technical and budgetary reference only. They do not constitute a legal contract for manufacturing or a guarantee of final supplier pricing.
• Copyright: © 2026 MIM-AuditPro. All Rights Reserved.

Payment & Contact

• Service Plans & Pricing
Founding Member Offer: First 50 Projects Only. Secure our 50% discount rates before we transition to standard enterprise pricing. (Remaining Slots: 12)
Limited-Time Early Adopter Offer: Strictly limited to the first 50 project audits in Jan 2026

    Option A : What You Will Get (Digital Delivery):
    Comprehensive Should-Cost Report: A detailed PDF/Excel breakdown of manufacturing costs.    Regional Price Benchmarking: Direct comparison between Taiwan and Mainland China (Unit Price & Tooling).Lead Time Analysis: Estimated T1 samples and mass production timelines.Expert Sourcing Strategy: Professional advice on supplier selection and risk management.Cost Optimization Tips: Strategic notes on how to negotiate or redesign for lower costs.⚠️ Important Note: This is a Technical Consulting Service. You will receive a professional analysis report to optimize your sourcing decisions. No physical manufacturing or parts delivery is included.Should-Cost Analysis | $59 USD As shown below(Standard: $120)

    Option B : What You Will Get (Digital Delivery)
    Comprehensive DFM Audit Report: A professional PDF document detailing your part's manufacturability.    Design Optimization Feedback: Specific suggestions for geometry, wall thickness, and draft angles to improve quality.Defect Risk Assessment: Expert identification of potential sink marks, warpage, or weld lines before you open the mold.Tooling Feasibility Analysis: Technical advice on gate locations, parting lines, and ejection points.Production Stability Tips: Recommendations to ensure a smoother mass production process and higher yields.⚠️ Service Disclaimer: This is a Technical Consulting & Design Audit service. You will receive a professional analytical report. This service does NOT include mold fabrication or physical part delivery. DFM Technical Report | $99 USD As shown below(Standard: $200)

    Option C : 🏆 Option C: What You Will Get (Digital Delivery)
    The All-in-One Strategic Package: Includes everything from both the Should-Cost Analysis and the DFM Technical Audit.    Integrated Strategic Insights: A holistic view that connects design optimization directly to cost reduction—showing you exactly how a design change saves money.Total Negotiation Power: Armed with both cost benchmarks and technical logic to lead high-level discussions with suppliers.Complete Project Risk Management: A roadmap to avoid both financial overspending and manufacturing defects before mass production begins.Priority Technical Support: Direct clarification via email for any data or suggestions provided in your integrated report.⚠️ Service Disclaimer: This is our Premium Total Consulting Package. You will receive a set of integrated digital reports (PDF/Excel). This service is strictly for analysis and consulting; it does NOT include physical manufacturing, tooling fabrication, or parts delivery. Comprehensive Bundle (Best Value) | $149 USD (Standard: $300)• Delivery: Your encrypted PDF report is delivered within 2 Business Days of file confirmation.
    • Payment: Secure transactions powered by Payoneer. (Payoneer Global Infrastructure: Encrypted & Protected. )

    Step 1: Secure Submission (Zero-upfront cost; simply upload your 2D/3D files for a preliminary evaluation.)
    Step 2: Technical Validation (Receive a watermarked PDF preview and a Payoneer payment link as proof of audit completion.)
    Step 3: Rapid Delivery (The unrestricted full report is dispatched instantly upon payment verification.)
    Your card is only pre-authorized. Payment is captured only after the audit report is delivered.

    Seamless Business Payment Standard Receipting: All transactions are processed through Payoneer. We accept major Credit/Debit Cards (Visa, Mastercard, AMEX) and Global Bank Transfers. A detailed digital invoice from MIM-AuditPro will be provided for your corporate accounting and expense reporting.

    Electronic Receipt Template

    • Disclaimer: Reports provided by MIM-AuditPro are for technical and budgetary reference only. They do not constitute a legal contract for manufacturing or a guarantee of final supplier pricing.
    • Copyright: © 2026 MIM-AuditPro. All Rights Reserved.

    Start My Technical Audit

    Guidelines for a Precise AuditRequired Files:3D Models: .STEP, .STP, or .IGS (Mandatory for volume/geometry analysis).2D Drawings: .PDF (Required for tolerances and surface finish specs).Critical Specifications (Please include in your notes):Material: Specific alloy or mechanical properties (e.g., Tensile Strength, Hardness).Surface Finish: Ra values and cosmetic surface requirements.Post-Processing: Requirements for plating, PVD, or heat treatment.Estimated Annual Usage (EAU): Projected volume per year (e.g., 10k, 50k, 100k+). This is essential for accurate tool life evaluation and unit cost optimization.Note: If specific data is not provided, we will audit based on standard MIM industry tolerances and "as-sintered" conditions.

    Comments section

    Feel free to leave the Email field blank—we respect your privacy

    • Disclaimer: Reports provided by MIM-AuditPro are for technical and budgetary reference only. They do not constitute a legal contract for manufacturing or a guarantee of final supplier pricing.
    • Copyright: © 2026 MIM-AuditPro. All Rights Reserved.